CleanMaster 150
The CM150 is our largest solvent agitating lift part washer built for heavy-duty tasks using lift agitation to clean deep into crevices and blind holes. Parts can also be lowered to soak as a traditional dip tank. The lift and tray are suitable for parts and batch cleaning up to 750 lbs.
Submerged agitation paired with solvents and remove greases, sludge, dirt, and debris provide clean parts with minimal effort. Agitation tank washers are well suited for parts with difficult to reach crevices, blind holes, and internal space where external spray or manual scrubbing doesn’t reach.
FEATURES
- Heavy Duty 10GA Powder Painted Steel Tank
- 10.4 Sq.Ft., 54” x 27.75” Lift Platform
- 750 Lbs. Weight Capacity
- 150-Gallon Fluid Capacity
- Low Friction Roller Wheels (No power robbing slides)
- Fire Safety Fusible Link for Lid and Lift
- 100mm Cylinder 1500 lbs. Peak Force @ 120 PSI
- Flow Requirements: 4 CFM @ 120 PSI
Applications
- Industrial Cleaning
- Automotive Service/Repair
- CNC Fabrication Rinse
- Agricultural Fabricators
- Agricultural Maintenance/Repair
- Power Sports Shops
- Government Municipalities
- Aerospace
- Post Processing
- Military Service/Repair
Product Highlights
High 750 lbs. capacity lift system capable of large part, high frequency agitation.
Lift Speed Control to tune for load conditions and part durability.
Low friction rollers to maximize weight capacity and agitating power.
Heavy-duty 10-gauge tank construction for rugged reliability.
Electrical Configurations
| Voltage | Phase | Freq. | Current | Main Fuse | Heating Wattage |
|---|---|---|---|---|---|
| 115 V | 1 PH | 60 Hz | 1 A | N/A | N/A |
| Heater Module Assembly | |||||
| Not Available for Solvent Machines | |||||