EcoMaster 150
The EM150 is our largest aqueous agitating lift part washer built for heavy-duty tasks using lift agitation to deep into crevices and blind holes. Parts can also be lowered to soak as a traditional dip tank. The lift and tray are suitable for parts and batch cleaning up to 750 lbs.
Submerged agitation paired with detergents and heat remove greases, sludge, dirt, and debris provide clean parts with minimal effort. Agitation tank washers are well suited for parts with difficult to reach crevices, blind holes, and internal volumes where external spray or manual scrubbing doesn’t reach.
FEATURES
- Heavy Duty 10GA 304 Stainless Steel Tank
- 10.4 Sq.Ft., 54” x 27.75” Lift Platform
- 750 Lbs. Weight Capacity
- 150-Gallon Fluid Capacity
- Low Friction Roller Wheels (No power robbing slides)
- Modular 6kW Heating Available in 230V or 460V 1 PH
- On/Off Heating with 130°F Thermostat Preset
- Thermostat Over-Temp Protection
- 1.5 HP Industrial Pump 40 GPM @ 30 PSI
- Fire Safety Fusible Link for Lid and Lift
- 100mm Cylinder 1500 lbs. Peak Force @ 120 PSI
- Flow Requirements: 4 CFM @ 120 PSI
Applications
- Industrial Cleaning
- Automotive Service/Repair
- CNC Fabrication Rinse
- Agricultural Fabricators
- Agricultural Maintenance/Repair
- Power Sports Shops
- Government Municipalities
- Aerospace
- Post Processing
- Military Service/Repair
Product Highlights
High 750 lbs. capacity lift system capable of large part, high frequency agitation.
Modular heating system with digital thermostat and 7-day programmable timer and available in 230V or 460V based on customer needs.
Low friction rollers to maximize weight capacity and agitating power.
Heavy-duty 10-gauge tank construction for rugged reliability.
Electrical Configurations
| Voltage | Phase | Freq. | Current | Main Fuse | Heating Wattage |
|---|---|---|---|---|---|
| Pump Module | |||||
| 115 V | 1 PH | 60 Hz | 1 A | N/A | N/A |
| Heater Module Assembly | |||||
| 230 V | 1 PH | 60 Hz | 27.3 A | 35 A | 6 kW |
| 460 V | 1 PH | 60 Hz | 13 A | 20 A | 6 kW |